Yamaha YZ450FY 2009 Owner's Service Manual page 197

3. Install:
• Collar "1"
• Apply the lithium soap base grease on the oil
seal lip.
• Install the collars with their projections "a" fac-
ing the wheel.
4. Install:
• Wheel
Install the brake disc "1" between the brake
pads "2" correctly.
5. Install:
• Wheel axle "1"
Apply the lithium soap base grease on the
wheel axle.
FRONT WHEEL AND REAR WHEEL
6. Install:
• Nut (wheel axle) "1"
Nut (wheel axle):
105 Nm (10.5 m•kg, 75 ft•lb)
7. Tighten:
• Bolt (axle holder) "1"
Bolt (axle holder):
21 Nm (2.1 m•kg, 15 ft•lb)
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork several
times with the front brake applied.
5-6