Panasonic PT-VMZ40 Operating Instructions Manual page 112

1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the fi rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
5 [LIGHT POWER]
Displays the setting status of [LIGHT POWER].
6 [INPUT]
Displays the status of the selected input.
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [SHUTTER]
Displays the status of the shutter function ([ON]: Enabled
(closed), [OFF]: Disabled (open)).
9 [VOLUME]
Displays the volume status.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display fi eld of the [Projector status]
screen, click it to display the content of the error/warning.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur. For the details of the display content, refer to
"[SELF TEST] display" (x page 131).
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
112 - ENGLISH
Chapter 5 Operation of Function - Web control function
10 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
11 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
12 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
13 [LIGHT TEMPERATURE]
Displays the temperature status of light source.
14 [LIGHT]
Displays the lighting status and runtime of the light source.
15 [SELF TEST]
Displays the self-diagnosis information.
16 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
2 Error code
1
2
1
2