TRENDnet TFM-PCIV92A Installation

Microsoft windows 7 installation

Hide thumbs Also See for TFM-PCIV92A:

TFM-PCIV92A(B1) Microsoft Windows 7 Installation

Minimum System Requirements

Computer with an available PCI slot Version 2.2



CPU: 1GHz or above



Memory: 1GB RAM or above



Hard Driver Space: 4MB or above



Note:

DO NOT install the TFM-PCIV92A in the computer until instructed to do so.

You will need to uncompress the drivers after you download it.

These instructions are only for TFM-PCIV92A version B1. Version A does not support Windows 7.

1. Go to http://www.trendnet.com/downloads. From

the Select Product dropdown list, scroll down until

you see TFM-PCIV92A. Then click Go. Select

the hardware version B1, click the Windows 7

driver link and save the drivers to your computer.

2. Browse the Windows 7 folder. Go

to the x64 folder if you have 64-bit

Windows 7. Go to the x86 folder if

you have 32-bit Windows 7.

3. Double click on the Setup icon

4. Click OK.

Table of Contents

Do you have a question about the TFM-PCIV92A and is the answer not in the manual?

Page 1 DO NOT install the TFM-PCIV92A in the computer until instructed to do so. You will need to uncompress the drivers after you download it. These instructions are only for TFM-PCIV92A version B1. Version A does not support Windows 7. 1. Go to http://www.trendnet.com/downloads. From the Select Product dropdown list, scroll down until you see TFM-PCIV92A.
Page 2 5. Shutdown your computer. 6. Open your computer's case. 7. Insert PCI Card firmly into an available PCI Card slot of desktop PC and then turn ON the computer and wait until the Windows desktop appears. 8. Drivers will install automatically 9.