User Guide TL-POE150S PoE Supplier Adapter Rev:1.0.0 71035991...
Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Powered Device (PD*) or PoE Receiver Adapter over the Ethernet cable. The Ethernet equipment can work as a Power Sourcing Equipment (PSE*) with the help of the TL-POE150S connection. PoE technology allows the existing Ethernet infrastructure to...
technology for it will ensure the normal working status of your network while keep the existing Ethernet infrastructure secure. *PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
Chapter 3. Connecting the PoE Supplier Adapter You can use TL-POE150S PoE Supplier Adapter with PD or PoE Receiver Adapter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Page 9
Connect the POWER+DATA OUT port of the TL-POE150S to a PD or a PoE Receiver Adapter with CAT 5 UTP cable. Now, the device can work normally with data and power. There are two schemes to realize the PoE. If the device supports PoE (take an IP camera with PoE for...
Page 10
TL-SF1008D TL-WA601G Note: Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the scheme 2, or else it will cause serious damage to your network device. If you want to know more details about TL-POE10R Receiver Adapter, please refer to “TL-POE10R User Guide”...