Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TP-Link TL-SF1008P
Summary of Contents for TP-Link TL-SF1008P
-
Page 1: User Guide
TL-SF1008P 8-port 10/100M Desktop PoE Switch User Guide Rev：1.0.0 71035874... - Page 3 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
-
Page 4: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 5: Ce Mark Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Page 6: Table Of Contents
Chapter 1. Introduction of the Product ...1 Overview of the Product ...1 Convention ...2 Features...2 Chapter 2. Installation ...3 Mounting the Switch on a Desk...3 Power On ...4 Chapter 3. Identifying External Components ...4 Front Panel ...4 Rear Panel ...6 Appendix A: Specifications ...8... -
Page 7: Package Contents
Chapter 1. Introduction of the Product Thank you for choosing the TL-SF1008P 8-port 10/100M Desktop PoE Switch. 1.1 Overview of the Product The TL-SF1008P 8-port 10/100M Desktop PoE Switch provides the seamless network connection, which integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. -
Page 8: Convention
*PD: a device powered by a PSE and thus consumes energy. Examples include powering IP telephones, wireless LAN access points, network cameras, network hubs, embedded computers etc. 1.2 Convention The Switch or TL-SF1008P mentioned in this User Guide stands for TL-SF1008P 8-port 10/100M Desktop PoE Switch without any explanation. 1.3 Features Complies with IEEE802.3, IEEE802.3u, IEEE802.3af standards... -
Page 9: Chapter 2. Installation
1) You can place the Switch on a flat desk. 2) Please insert the power adapter carefully to the power socket of the switch, and then connect it properly to a power source through the cable of the switch. 3) Ensure adequate ventilation space around the switch for dissipating heat and air. -
Page 10: Power On
2.2 Power On The TL-SF1008P Switch can be used with DC power supply. Powering on the Switch, it will automatically initialize and its LED indicators will respond as follows: 1) All the LED indicators except PoE ports LED will light syn-... - Page 11 Name Status On(green) Power On(green) PoE ports On(red) (port-1~port-4) Flashing (red) On(red) PoE MAX Flashing (green) Link/Act On(green) (port-1~port-8) Indication Power on. Power off. There is a PoE PD connected to the port, which supply power successfully. The PoE power circuit may be in short, or the power current may be over that of the PD’s classification.
-
Page 12: Rear Panel
Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4w, and Port3 will use 10w ,no power will be supplied to Port 4. 3.2 Rear Panel Figure 3-2 TL-SF1008P Switch Rear Panel There is a 100Mbps device connected to the corresponding port. - Page 13 10/100Mbps Auto-Negotiation RJ45 Ethernet port. The working status can be indicated by the corresponding LEDs on the front panel. Ethernet Ports (1-8): Besides the 4 PoE ports, the TL-SF1008P Switch is also equipped with the other four 10/100Mbps Auto-Negotiation RJ45 ports without PoE function. Once the...
-
Page 14: Appendix A: Specifications
Appendix A: Specifications General Standard IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3af Topology Star Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex) Data Transfer Rate Fast Ethernet: 100Mbps (Half Duplex) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media(Cable) 100Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω... - Page 15 Environmental and Physical Power Consumption Operating Temperature Storage Temperature Operating Humidity Storage Humidity 5.8 watts. (max. no PD connected) 58 watts (max. with 53w PD connected) 0 ~40°C (32 ~104°F ) -40 ~70°C (-40 ~158°F) 10%~90% non-condensing 5%~95% non-condensing...