Plastic case, desktop or wall-mounting design
External Power Adapter supply
Chapter 2. Installation
2.1 Mounting the Switch on a Desk
To install the Switch, please follow the steps:
1)
You can place the Switch on a flat desk.
2)
Please inspect the Power Adapter carefully and make sure that it is properly connected to a
power source.
3)
Ensure adequate ventilation space around the switch for dissipating heat and air.
Note:
Please avoid any heavy thing placed on the switch.
2.2 Power On
Powering on the Switch, it will automatically initialize and its LED indicators will respond as
follows:
1)
All of the Link/Act LED indicators will flash momentarily, which represents a resetting of the
system.
2)
The Power LED indicator will light all the time.
Note:
If the LED indicators don't respond as described above, please check the power supply and its
connection.
2