Omega MONZA TTG22T User Manual page 37

EN
STEP 4: Connect the motor and oil line
1. Attach the motor (#11) to the wheel bracket using a polyurethane block (#12) and a large flat washer Ø10 (#58), hex bolt M8x65
(#36), flat washer Ø8 (#37), lock washer Ø8 (#57), hex lock nut M8 (#38).
2. Connect the clear oil tube (# 43) to the gear pump oil inlet fitting, positioning it with a clamp (# 44).
3. Connect the high pressure oil tube (#39) to the gear pump oil outlet connector, sealing with the Ø11.2x2.4 O-ring (#32).
4. Connect the hydraulic hose (No. 42) to the hydraulic tank connector, sealing with O-ring Ø11.2x2.4 (No. 32).
Note: Tighten the hydraulic hose connector to a torque of 80-90N - m. Adjust the hydraulic hose to an unkinked state and the
connector must be in a vertical position.Dispose of your machine in an environmentally friendly manner. Machines should not
be disposed of with household waste. Their plastic and metal components can be sorted according to their nature and recycled.
STEP 5: Electrical Break Switch
1. Connect the wires from the motor and the electrical break switch with a quick connector.
37