Omega MONZA TTG22T User Manual page 36

EN
STEP 3: Attach the Beam and Hand Container
1. Attach the beam to the tow bar using the hitch pin (#50) and the R-pin (#71).
2. Attach the rear support leg (#85) to the tow bar using the M10x70 hex bolt (#137) and M10 hex lock nut (#114). When standing,
secure the beam with a pull-out handle (#82) and R-pin (#71).
3. Remove M6x65 hex bolt (#104), large flat washer Ø6 (#105) and M6 nylon lock nut (#102) from tow bar, secure hand pan
(#101) to tow bar with items #104, #105 and #102.
4. Attach three plastic handles (#14) to the control handle and two plastic handles (#14) to the beam control valve mounting plate
with the M10 hex lock nut (#114).
36