Silvercrest SHC 2000 B1 Operating Instructions Manual page 9

WARNING! RISK OF PERSONAL INJURY!
Do not cover the air filter while operating the appliance.
►
Clean the grill at regular intervals.
The hairdryer becomes hot when it is in use. Hold it only by
►
the grip when it is hot.
Operation
NOTICE
► Before using the appliance for the first time, run it at the highest heat and
blower level for approx. 2 minutes (see "Heat and blower levels"). This re-
moves manufacturing residue on the heating elements inside the appliance.
Heat and blower levels
1) Insert the plug into a power socket.
2) Switch the hairdryer on with the blower level switch 4.
The hairdryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch 4) and the level of heat
(heat level switch 5):
Blower levels
0
Heat levels
3) After use, switch the appliance off in that you place the blower level switch 4
into position "0". Then remove the plug from the wall socket.
■ 6 │ GB │ IE
The hairdryer is switched off
reduced air flow
full power air flow
low heating level
medium heating level
high heating level
SHC 2000 B1