Connecting The Cell Power Cable To The Power Center - Pentair COMMERCIAL INTELLICHLOR IC60P Installation And User Manual

24
Connecting the IntelliChlor IC20, IC40 IC60 SCG Cell Power Cable to the Power Center
After the cell installation is completed, connect InitelliChlor SCG cell's power cable to the Power Center:
WARNING - Switch OFF main system power to the Power Center before making any connections.
1. Be sure that AC power is switched OFF before connecting the power cord to the Power Center.
2. Align the four (4) pins of the cell power cord connector with the socket on the bottom of the Power
Center and insert the connector. Turn the round socket nut until it locks the connector in place.
®
IntelliChlor Salt Chlorine Generator Installation and User's Guide
CAUTION - The CIC60P or CIC60S can only
be plugged into a PC100 or CPC100 power
center. Do not plug into IntelliTouch, EasyTouch
or SunTouch systems.
Connector socket nut.
To cell assembly