Table of Contents
Advertisement
18
General Recommendations
•
After new pool construction has been completed, before installing the IntelliChlor
IntelliChlor "empty cell" (P/N 520588) to remove debris from the pipes for thirty (30) days and to
allow sufficient time for the pool plaster (or other similar material) to properly cure and seal.
•
Read and keep this Installation and User's Guide in a safe place.
•
Increase Sanitizer Output level as necessary after heavy rain (outdoor pools) and return to normal
afterwards.
•
Increase Sanitizer Output level when air and water temperature rise.
•
Increase Sanitizer Output level when number of pool users increase.
•
Use Cyanuric Acid ONLY as necessary to stabilize chlorine in the pool water in outdoor pools.
NOTE: DO NOT USE CYANURIC ACID IN INDOOR POOLS.
•
Once a month take a pool water sample to a pool professional for a complete analysis.
General Cautions
•
Do not get fertilizer in your pool. Fertilizers contain nitrates, which cause a
high chlorine demand.
•
Never use dry acid to adjust pH in arid geographic areas with excessive
evaporation and minimal dilution of pool water with fresh water. A buildup
of byproducts can damage the IntelliChlor SCG.
•
Do not add any pool water balancing chemicals (including salt) unless the
IntelliChlor SCG is switched off.
•
Do not let the Cyanuric Acid level drop below 30 ppm in outdoor pools.
NOTE: DO NOT USE CYANURIC ACID IN INDOOR POOLS.
®
IntelliChlor
Salt Chlorine Generator Installation and User's Guide
®
SCG, install the
Advertisement
Table of Contents
