Table of Contents
Advertisement
9-10 Preventative Maintenance Service
9-11 Recommended Torque For Knife Bolts
NOTE: For Rotor knife applications, use SEC Grade 8 hex head cap
METRIC SCREW SIZE
- 39 -
6. Turn the rotor so that the knives are aligned with a
secondary bed knife on the rear of the granulator and
continue with the same procedure used to setup the
primary bed knife.
7. After the clearance setting of both the primary and
secondary bed knives is complete and checked, turn the
rotor by hand to ensure that none of the rotor knives hit
the bed knives.
8. Double check inside the machine to make sure no tools
or other articles are left in the cutting chamber or have
fallen into the screen area.
9. Close the cutting chamber and tighten the fasteners
(refer to Section 4-2).
Follow a systematic preventative maintenance program to
help avoid costly down time. Call the AEC Engineering
Service Department to arrange a schedule of inspections.
This service can be tailored to fit your maintenance
requirements.
screws.
For Bed knife applications, use Series 1960 Grade 8 socket
head cap screws.
Table 6
Recommended Bolt Torques (Metric)
M8
M10
M12
M14
M16
M18
M20
M24
FT/LBS TORQUE
(DRY)
28
54
100
155
232
340
472
610
Advertisement
Table of Contents
