Texas Instruments TI-83 Manual Book page 212

Creating a Name
in the Stat List
Editor
Removing a List
from the Stat List
Editor
Removing All
Lists and
Restoring L
1
through L
6
Clearing All
Elements from a
List
12-12 Statistics
To create a name in the stat list editor, follow these steps.
1. Follow step 1 on page 12.11 to display the
prompt.
2. Press [letter from A to Z or q ] to enter the first letter of
the name. The first character cannot be a number.
3. Enter zero to four letters, q, or numbers to complete the
new user-created list name. List names can be one to
five characters long.
4. Press Í or † to store the list name in the current
column of the stat list editor. The list name becomes an
item on the
LIST NAMES
To remove a list from the stat list editor, move the cursor
onto the list name and then press {. The list is not deleted
from memory; it is only removed from the stat list editor.
Note: To delete a list name from memory, use the
DELETE:List
selection screen (Chapter 18).
You can remove all user-created lists from the stat list
editor and restore list names
through in either of two ways.
6
Use
SetUpEditor
Reset all memory (Chapter 18).
You can clear all elements from a list in any of five ways.
Use to clear specified lists (page 12.20).
ClrList
In the stat list editor, press } to move the cursor onto a
list name, and then press ' Í.
In the stat list editor, move the cursor onto each
element, and then press { one by one.
On the home screen or in the program editor, enter
listname
0!dim(
(Chapter 11).
Use
ClrAllLists
menu (Chapter 11).
through
L
1
with no arguments (page 12.21).
to set the dimension of listname to 0
)
to clear all lists in memory (Chapter 18).
Name=
MEMORY
to columns
L 1
6