Table of Contents
Advertisement
Settings
Settings
<Beep>
This setting is available only when 2-way speaker
system is selected (page 37).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SET-UP Memory>
Memorise, recall, or clear the settings you have made.
• The memorised settings are kept even when the unit
is reset.
• Available only when <SET-UP Memory> is set to
[Unlock] (selected initially).
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorised settings.
• Memory: Memorises the current settings.
• Clear: Clears the currently memorised settings and
return to the factory (Initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
You can also set to lock the <SET-UP Memory> from
being changed. Touch [Lock] to lock the settings.
• Some items in <SET-UP> menu, eg. <Speaker/
X'over>, cannot be adjusted when [Lock] is selected.
<Wireless/HDMI SETUP>
Selection for wireless Apple CarPlay/Android Auto or
HDMI device.
• HDMI: Select this to use the connected HDMI device.
Wireless connected Apple CarPlay and Android Auto
will be disconnected.
• Wi-Fi (initial): Select this to use wireless Apple
CarPlay/Android Auto. The system of this unit is
rebooted after touching [OK].
<OEM Setup>
Get information, and change the settings for using the
ADS adapter.
<Initialise>
Initialise all settings you have made. Touch and hold
[Enter] to initialise the settings.
• After initializing the settings, adjust the settings on
the <Initial Setup> screen.
<Serial Number>
Displays the serial number.
<Steering Remote Controller>
Assign the functions to the keys on the remote
controller on the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
• For connection, see page 53 for more information.
1
Touch [SET] for <Steering Remote
Controller> to display the setting screen.
2
Press and hold a button on the steering
remote controller to register.
3
Select a function to assign to the selected
button.
Steering Remote Controller Setting
Performing Steering Wheel Remote Control Learning Process.
Press each of the buttons in sequential order.
VOL
VOL
ATT
SRC
Done
45
ENGLISH
Advertisement
Table of Contents
