Table of Contents
Advertisement
INSTALLATION
8. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
9. Refit the bracket fitting the bottom
hinge pin. Replace both adjustable feet.
Transfer the lower door to the property
position.
10. Make the middle hinge reverse the
direction 180°C, then transfer it to the
left property position. Make the middle
hinge pin in the upper hole of the lower
door, then tight the bolts.
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before finally
tightening the hinge.
11. Place the upper door back on. Ensure the
fridge door is aligned horizontally and
vertically so that the seals are closed on
all sides before finally tightening the top
hinge.
12. Insert the hinge bracket and screw it to
the top of the unit.
13. Use a spanner to tighten it if necessary.
10
Unscrew
Screw
Screw
Screw
Advertisement
Table of Contents
