Appliance Placement - Hisense RL528D4ECE Instructions For Use Manual

Appliance placement

Appliance installation should be carried out by at least two persons to avoid any personal injury or
damage to the appliance.
• The appliance must stand level or tilted slightly to the back. It should be stable and placed a solid
base. At the front, the appliance is fi tted with two adjustable feet that can be used to level the
appliance. At the rear side, casters allow for easier installation of the appliance (only with some
models).
• After you have levelled the appliance using the adjustable feet, adjust the additional foot for extra
stability of the appliance.
• Do not expose the appliance to direct sunlight and do not place it near sources of heat. If this
cannot be avoided, install an insulation panel.
• The appliance is intended for free-standing installation. To reach the rated/minimum power
consumption, always provide 50 mm of clearance between the wall and the back of the appliance,
and above the appliance. Also allow adequate air circulation on either side of the appliance and
above it.
• The appliance can also be placed adjacent to or between kitchen cabinets or cupboards, or
adjacent to a wall. In case of such placement, the appliance will operate flawlessly; however,
power consumption could increase. Observe the minimum clearance above and behind the
appliance, as indicated in the figure.
11