Smart Functions; Using Lg Thinq Application - LG R51WT Owner's Manual

en-us_main.book.book Page 12 Monday, November 6, 2023 11:47 AM

12 SMART FUNCTIONS

SMART FUNCTIONS

Using LG ThinQ Application

LG ThinQ Application Features
• Suction Level Adjustment
The user can use the mobile APP to switch
between four suction modes: Low, Mid, High
and Turbo. The default is the Mid mode.
• Smart Turbo
Automatically detects and cleans carpets using
powerful suction.
Smart Turbo settings can be turned on and off in
the LG ThinQ app. If the suction level is Turbo,
detecting the carpet does not increase the
suction power.
• Simple Control
- Operate the robot cleaner manually from the
Simple Control screen.
• Volume Setting
- The volume of the product's voice guidance
can be adjusted with the LG ThinQ app.
• Language Setting
- The user can switch the languages.
• Locate
- When the robot cleaner is powered on and you
press the Locate button, the robot cleaner will
make a sound to inform you of its current
location.
• Schedule Cleaning
- Use Schedule Cleaning to set a regular
cleaning time for the robot cleaner to begin
cleaning.
• Cleaning Diary
- The Cleaning Diary records the date, cleaning
mode, and start and completion times of each
cleaning and shows the cleaning history.
• My Zone
With the My Zone feature and the LG ThinQ
application, a designated area of the mapped
home can be selected for specific cleaning
attention.
- Specified Area Cleaning: Allows you to select
part of the mapped area to clean or to clean
selected areas in a certain order.
- Do Not Clean Area: Exclude certain areas
from cleaning, such as bathrooms or pet
zones, if desired. If Do Not Clean Areas are
set too close together, the robot cleaner may
be unable to clean between them.
NOTE
• If you change your wireless router, Internet
service provider, or password, delete the
connected appliance from the LG ThinQ
application and connect it again.
• This information is current at the time of
publication. The application is subject to change
for product improvement purposes without
notice to users.
• If you press the setting button at the top right of
the screen to clean the selected area, you can
edit the area and set the area to be cleaned.
• Set the cleaning prohibited area to prevent the
robot vacuum from falling or being constrained
to clean.
- If it falls on the toilet or hallway
- If you are constrained by a threshold or under
a sofa
• When setting the cleaning prohibited area,
consider the movement error and set the
prohibited area large.
• If you set the no-clean area while the product is
running, it stops cleaning and sets the
prohibited area. At this time, you can continue
cleaning after setting the prohibited area in a
paused state during cleaning.
• If you want to save the drawing and prohibited
area settings, press the power button of the
robot vacuum cleaner outside the charging
station for 3 seconds.
• Drawings may be deleted if the robot vacuum
cleaner's main power switch is turned off.
However, if the drawing is saved by pressing the
power button for 3 seconds, it will not be
deleted.
• If the drawing is distorted or there are missing
spaces, initialize the drawing by turning the
main power switch of the robot vacuum cleaner
off and on before saving the drawing.
• The robot vacuum cleaner updates the drawing
every time it cleans. If the robot vacuum cleaner
is turned off while cleaning, the drawings up to
that point are saved in the LG ThinQ app.
• After the drawing is completely saved, you can
delete the drawing by pressing the charging
button on the robot vacuum cleaner for more
than 15 seconds. At this time, the product is
initialized and reconnect to the LG ThinQapp.