Parkside PBRA 20-Li B2 Translation Of The Original Instructions page 45

Problem
No sound
USB stick not rec-
ognised
Playback of USB
stick not possible
Playback via Blue-
tooth not possible
®
Jobsite radio is not
displayed on the
mobile end device
Possible cause
Radio is set too quiet
The radio's mute function is
activated
USB stick improperly formatted Format USB stick to FAT32
USB socket defective
USB stick too large
USB stick improperly formatted Format USB stick to FAT32
Incorrect audio format
Bluetooth ® not activated on
mobile end device
Jobsite radio not selected as
playback medium on mobile
end device
Device already coupled with
another mobile end device
Bluetooth ® module defective
The Jobsite radio and mobile
end devices are outside of the
transmission range
Mobile end device does not
support the Bluetooth
dard of the Jobsite radio
Error correction
Increase volume (see "Setting the
volume" in "Operation" chap-
ter")
Check whether the mute function
is active. If so, the relevant sym-
bol will be shown on the display.
Deactivate the mute function by
pressing the Mute button (14)
Repairs must be carried out by
our Customer Service depart-
ment.
Use a USB stick with no more
than 64 GB capacity
Convert the audio data into the
relevant format (MP3, WAV,
APE, FLAC)
Activate Bluetooth
tings of the mobile end device
Select Jobsite radio in the Blue-
tooth ®
device
Disconnect mobile end devices
in range of the Jobsite radio
Repairs must be carried out by
our Customer Service depart-
ment.
Reduce the distance between the
Jobsite radio and mobile end
device
stan- Use a newer mobile end device
®
GB
® in the set-
settings of the mobile end
IE
45