Troubleshooting - Parkside PBRA 20-Li B2 Translation Of The Original Instructions

GB IE

Troubleshooting

Switch off the device and remove the battery from the device and
the plug-in power adapter from the mains socket before carrying
out any work on the device.
Problem
Machine does not
start
Device works with
interruptions
Faltering playback
Noise during play-
back
No sound or very
quiet with AUX
44
Possible cause
Battery (22) not inserted
Rechargeable battery (22)
discharged
On/Off button (2) is faulty.
Internal loose contact
On/Off button (2) is faulty.
Poor signal
Transmission range for Blue-
tooth connection exceeded
Playback device is off or set to
"Stop"
Playback device is set too
quiet
Error correction
Insert the battery (22) (see "In-
serting/removing the battery")
Charge the battery (22) (observe
the separate operating instruc-
tions for the rechargeable bat-
tery and charger)
Repairs must be carried out by
our Customer Service depart-
ment.
Repairs must be carried out by
our Customer Service depart-
ment.
(FM and DAB+ only) Adjust an-
tenna (3)
(FM and DAB+ only) Adjust the
frequency (see "Manual search"
in the chapter "Station search
(FM))"
Place the radio where there is a
better signal.
Place the connected device near
the radio. Transmission ranges of
up to 30 m are possible. The op-
timal range is approx. 10 m.
Start playback on playback
device
Increase volume on playback
device