Pausing/Continuing Playback; Selecting Tracks; Tws - True Wireless Stereo; System Settings For All Modes - Parkside PBRA 20-Li B2 Translation Of The Original Instructions

fl ashing and the device will display
"Connected".
5. Playback can only be started on the
Bluetooth playback device.

Pausing/continuing playback

Pausing playback
1. Press the Play & Pause button (15)
during playback.
Continuing playback
2. Press the Play & Pause button (15).

Selecting tracks

1. Press the NEXT button (12) to jump to
the next track.
2. Press the PREV button (16) to reset the
current track to the beginning.
3. Press the PREV button (16) again within 3
seconds to go back to the previous track.
TWS – True Wireless Stereo
With the TWS function you can connect
two identical radios to a stereo speaker
pair via Bluetooth
®
1. Ensure that neither of the devices is
connected to a playback device via
Bluetooth .
®
2. Press the Source button (17) repeatedly
until the time display shows "Bluetooth".
3. Press the TWS button (18) once on
each device. The TWS indicator will
fl ash on the display (9).
4. The devices will connect with one
another and the TWS indicator on
the display (9) of one device will stop
fl ashing. „TWS Connected" appears in
the display.
5. The device on which the TWS indicator
continues to fl ash is the master device.
„TWS Disconnected" appears in the
.
display. The mobile phone is now con-
nected to this device as described in
the chapter "Operating via Bluetooth
„TWS Connected" is now shown in the
display.
6. To cancel the connection between the
two speakers, press the TWS button
(18) once.
System settings for all
modes
Information on special settings for
the different playback modes can
be found in the relevant chapters.
In Radio mode (FM and DAB+)
1. Press and hold the Info/Advanced
button (10) for approx. 2 seconds to
access the Settings menu.
2. Scroll to the list entry "System" using
the NEXT / PREV buttons (12/16) or
the volume control knob (14).
3. Push the volume control knob (14) to
confi rm the selection.
4. Scroll to the desired entry using the
NEXT / PREV buttons (12/16) or the
volume control knob (14).
5. Push the volume control knob (14) to
confi rm the selection.
When playing back external media
(USB, AUX and Bluetooth
1. Press and hold the Info/Advanced
button (10) for approx. 2 seconds to
access the Settings menu.
2. Scroll to the desired entry using the
NEXT / PREV buttons (12/16) or the
volume control knob (14).
3. Push the volume control knob (14) to
confi rm the selection.
GB IE
® ".
® )
39