Related Manuals for Rize Home Contemporary IV
Summary of Contents for Rize Home Contemporary IV
- Page 1 Owner’s manual Contemporary IV Adjustable bed SERIAL NUMBER: _____________________________ (Place your serial number here for ready reference)
- Page 2 Owner’s manual | Contemporary IV adjustable bed Owner’s manual | Contemporary IV adjustable bed...
-
Page 3: Table Of Contents
This product and all our bedding products are covered by one or more of the following issued and pending U.S. patents including Nos. 7448100, D657157, D663542, D657158, D657156, 8209801, 8209800, D663544, D663543 and other patents pending. Photos are for illustration purposes only. COPYRIGHT © 2023 by Rize Home, LLC. 07.19.2023... -
Page 4: Safety Precautions
This adjustable bed is designed exclusively for in-home use. Operation is subject to the following two conditions: (1) This FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED INTO A SURGE PROTECTOR (not supplied with this adjustable bed). Owner’s manual | Contemporary IV adjustable bed... - Page 5 Safety precautions Lift warning device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not sit on the head or foot sections while in the raised IMPORTANT NOTE: To comply with the FCC RF exposure position, or during lift or lowering cycles.
-
Page 6: Parts List
Sync cable (1) ** * The leg comes assembled as one whole leg with the option of removable leg extenders. ** Only available with Twin XL, Split Cal King, and Split Queen bed sizes. Owner’s manual | Contemporary IV adjustable bed... -
Page 7: Installation Guide
Installation guide Setting up your adjustable bed Lift the adjustable bed out of the shipping carton carefully, and put it on a flat floor with the top side facing downward. Remove any accessory boxes from inside the frame. Remove the legs, retainer bracket, and power supply attached to the adjustable bed. - Page 8 If you installed bed legs, do not rest the bed on its side so the weight may not damage the legs. IMPORTANT! Make sure power cords do not obstruct any adjustable bed mechanisms. Owner’s manual | Contemporary IV adjustable bed...
- Page 9 Installation guide From under the head, lumbar, and foot sections of the bed, cut and remove the orange zip ties holding the bars. NOTES: • Cut these zip ties only AFTER the adjustable bed is turned over on its legs or placed on a platform bed with the top side facing up.
- Page 10 Line up the two beds, then use the bed leg strap to wrap the inside legs together tightly (front leg to front leg and back leg to back leg). Fasten the straps to prevent movement & maintain stability. Owner’s manual | Contemporary IV adjustable bed...
- Page 11 Installation guide Assembling the headboard bracket (optional) NOTE: Headboard bracket parts are sold separately. Turn the adjustable bed over with the top side facing downward. Remove the leg from the head section of the adjustable bed by turning the leg in a counter-clockwise direction. Slide the inner headboard bracket over the hole for the leg installation.
- Page 12 8. IMPORTANT! Make sure your platform or slatpack bed system can support the maximum weight of the adjustable bed (135 lb for Queen beds and 163 lb for King beds) and the mattress. Owner’s manual | Contemporary IV adjustable bed...
-
Page 13: Remote Control Guide
Remote control guide Presets ANTI-SNORE (1) ZG OR ZERO GRAVITY (12) Press this button to gently raise the head section and allow easier Press this button to raise the legs slightly higher than the chest air intake which can help reduce snoring. allowing blood to flow back to the heart to help reduce stress and fatigue. - Page 14 5 seconds or until the remote backlight flashes. The new bed position is now stored in your selected preset button overriding the factory default. To restore the presets to their factory settings, see "Resetting your system". Owner’s manual | Contemporary IV adjustable bed...
- Page 15 Remote control guide Pairing the remote control to your adjustable bed Your adjustable bed is already paired to your remote at the factory. Manual pairing is only needed for replacement remote controls . NOTE: For the pairing to be successful, make sure the distance between the control box and the remote control is not more than 2 meters.
- Page 16 On the remote control, press and hold the FLAT and ZG buttons for 5 seconds until the remote backlight flashes. All customized settings on the remote control are now restored to their default settings. Owner’s manual | Contemporary IV adjustable bed...
-
Page 17: Special Functions
Special functions Using the mounted USB ports The convenient USB ports located on the side of the head section of your adjustable bed provide easy access for charging today's tech devices. Activating the emergency power down feature Your adjustable bed supports the emergency power down feature when a power failure occurs while the head and/or foot sections are raised. - Page 18 • For more information on using the mobile app to control your adjustable bed, see Rize Home app guide. The mobile app in dark mode Owner’s manual | Contemporary IV adjustable bed...
-
Page 19: Troubleshooting
Troubleshooting In the event the adjustable bed fails to operate, investigate the symptoms and possible solutions below. Symptom Solutions The adjustable bed does not respond when the remote is Make sure the remote control is paired with the adjustable used. The remote does not work. bed. - Page 20 Clear any clutter or obstructions under and around the adjustable bed. Radio frequency interference from other remotes or electronic devices may affect normal operation. Check the batteries in the remote. Press the lift buttons firmly and accurately. Owner’s manual | Contemporary IV adjustable bed...
- Page 21 Troubleshooting In the event the adjustable bed fails to operate, investigate the symptoms and possible solutions below. Symptom Solutions The adjustable bed is squeaking. Remove or loosen any pin, nut, bolt or white bushing one at a time. Lubricate it by applying the grease with a cotton swab. Using a lithium or spray lubricant is recommended.
-
Page 22: Warranty
Rize Home, LLC nor the seller shall be responsible for them: ordinary wear and tear; damage not 5-Year Period for All Labor: The above warranty will apply directly caused by a defect covered by this express warranty;... - Page 23 Home, LLC requests for documentation or other evidence of the defect, such as return of parts to Rize Home, LLC, the cost of which will be paid by Rize Home, LLC if the defect is confirmed by it or inspection by an authorized Rize Home, LLC service technician or other person approved in writing All product names, brands, and trademarks are the property of their respective owners.
- Page 24 If you experience any trouble with your adjustable bed within the warranty period, please consult the troubleshooting guide provided with your bed and online, if applicable. IF PROBLEMS PERSIST, PLEASE CALL CUSTOMER SERVICE TOLL FREE NUMBER 1-800-444-8444 Please have your receipt ready and available. Thank you and enjoy your adjustable bed!
Need help?
Do you have a question about the Contemporary IV and is the answer not in the manual?
Questions and answers
the light senor is not working
To turn the motion sensor on, press the motion sensor button and the ZG button for 6 seconds until the backlight flashes. To turn it off, press the motion sensor button and the Anti Snore button for 6 seconds until the backlight flashes.
This answer is automatically generated