Table of Contents
Advertisement
3.11. Speed Dial Buttons
Flexible buttons not assigned as a line are available for configuration as feature buttons including Speed
dial. Pressing a Speed dial button selects your line and sends the stored number to the call server for
processing. Refer to the
on defining flexible buttons.
To place a call using Speed dial:
o Press the desired Speed dial flexible button. The LIP Phone activates the speakerphone and
places the call on your line. You may select a different line button on your LIP Phone prior to
selecting the Speed dial button.
o Lift the handset for privacy or press the headset button to use the headset
3.12. Speed Number Dialing
LIP Phone 6830 incorporates a Phone Book with up to 100 records. Refer to
on use of the Phone Book. Each record includes a name, contact information and a Speed number, (00
to 99). When you dial a Speed number, the LIP Phone initiates a call to the contact. You must enable
Speed number dialing, see
Speed number dialing.
To place a call using a Speed number:
o Dial the Speed number (00-99) for the desired contact. After a short delay, the LIP Phone sends
the contact information from the Phone Book. You may dial # to set up the call immediately. If
the Phone Book has no record of the Speed number, the LIP Phone sends the digits dialed to the
call server for processing.
3.13. DND (Do-Not-Disturb)
When the DND (Do Not Disturb) feature is active, the LIP Phone will not notify you of an incoming call.
The LIP Phone does not ring allowing you to work without interruption from an incoming call. The call
server configuration determines routing of the incoming call while your phone is in DND.
To activate DND:
o While the LIP Phone is idle, press the DND button. When active, the DND button LED illuminates
red, and "Do not disturb" displays in the LCD.
To deactivate DND:
o Press the illuminated DND button again.
3.14. Muting a Call
Mute toggles the microphone of the Handset, Speakerphone and Headset off and on. When Mute is
active, the connected party will not receive audio from the microphone.
To mute the microphone:
o Press the Mute button. The Mute button LED illuminates red indicating mute is active.
To turn the microphone back on:
o Press the illuminated Mute button again.
Setting Flexible Buttons
Enabling Speed Number Dialing
7
section under Setting Your Preferences for instruction
under Setting Your Preferences to enable
LIP Phone 6830
User Guide
section 4.2
for information
Oct. 07
Advertisement
Table of Contents
