Download Print this page

MadgeTech RHTemp101 Product Information Card

Advertisement

Quick Links

Product Quick Reference Card
Device Maintenance
Battery Replacement
Materials:
Small Phillips Head Screwdriver
Replacement Battery (LTC-7PN)
- Puncture the center of the back label with the screw driver
and unscrew the enclosure.
- Remove the battery by pulling it perpendicular to the circuit
board.
- Insert the new battery into the terminals and verify it is secure.
- Screw the enclosure back together securely.
Note: Be sure not to over tighten the screws or strip the threads.
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT
SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE,
CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR
EXPLODE IF HEATED ABOVE 80°C (176°F).
Recalibration
The RHTemp101, RHTemp110 and TempRetrieverRH standard
calibration is one point at 25°C and two points at 25%RH and
75%RH.
Pricing:
Recalibration traceable to NIST
$90.00
Recalibration
$70.00
Additional:
As Found Data
$15.00
Additional Points
$15.00 per point
To send the devices back, visit www.madgetech.com, select Services
then RMA Process.
Specification
RHTemp101
RHTemp110
Temperature Sensor
Internal semiconductor
Internal semiconductor
Temperature Range
–40 to +80°C
–40 to +80°C
Temperature Resolution
0.1°C
0.1°C
Calibrated Accuracy
+0.5°C
+0.5°C
Humidity Sensor
Internal semiconductor
Internal semiconductor
Humidity Range
0 to 95%RH
0 to 95%RH
Humidity Resolution
0.5%RH
0.5%RH
Calibrated Accuracy
+3.0%RH
+3.0%RH
Memory
21,845/channel
21,845/channel
Sample Rate
2 seconds to 12 hours
2 seconds to 12 hours
LED Indicator
Red
Red
RH Units
%RH, dew pt., water vapor concentration (mg/ml)
Alarm
Temperature
No
Required Interface Package
IFC110 or IFC200
IFC110 or IFC200
Baud Rate
2,400
57,600
Typical Battery Life
1 year
10 years
Operating Environment
–40 to +80°C, 0 to 95%RH (Non–Condensing)
Material
ABS plastic
ABS plastic
Dimensions
1.4" x 2.2" x 0.6"
1.7" x 2.3" x 0.8"
(36mm x 56mm x 16mm)
(44mm x 59mm x 21mm)
Approvals
CE
CE
Specifications subject to change.
See MadgeTech's terms and conditions at www.madgetech.com
MadgeTech, Inc.
PO Box 50
Warner, NH 03278
l
Phone 603.456.2011
Fax 603.456.2012
l
www.madgetech.com
info@madgetech.com
l
Product Information Card
TempRetrieverRH
Internal semiconductor
-40 to +80°C
0.1°C
+0.5°C
Semiconductor
0 to 95%RH
0.1%RH
+3.0%RH
16,383/channel
5 seconds to 30 min.
Red & Green
Temperature
IFC110 or IFC200
38,400
RHTemp101
1 year
Temperature and Humidity Recorder
RHTemp110
ABS plastic
Temperature and Humidity Recorder with 10 Year Battery Life
1.4" x 2.2" x 0.6"
TempRetrieverRH
(36mm x 56mm x 16mm)
Temperature and Humidity Recorder with Pushbutton Start/Stop
CE
REV A 2008.07.08
RHTemp101 and RHTemp110 and
TempRetrieverRH
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.

Advertisement

loading

Summary of Contents for MadgeTech RHTemp101

  • Page 1 (36mm x 56mm x 16mm) Additional Points $15.00 per point Temperature and Humidity Recorder with Pushbutton Start/Stop Approvals To send the devices back, visit www.madgetech.com, select Services Red 485 then RMA Process. Dark Blue Pantone 289 Light Blue 58% of Pantone 289 Specifications subject to change.
  • Page 2 USB cable into the computer and the serial cable into suitable for your application. - Select Alarm Settings from the Device menu in the MadgeTech the serial port. software. A window will appear allowing the customer to set the - Enter in any other desired high and low temperature alarms.

This manual is also suitable for:

Rhtemp110Tempretrieverrh