Advertisement
MINOR ADJUSTMENT OF
WATER LEVEL
Move the snap along "OPEN" direction.
To lower water level: Move water cup
down to a proper height and rotate
screw anticlockwise to achieve the
desired water level. (Refer to float
adjustment instructions.)
To elevate water level: Rotate screw
clockwise and raise float to the desired
water level. Elevate water cup to a
proper position as well. (Refer to float
adjustment instructions.)
Fasten the snap along "CLOSE"
direction.
Float adjustment instructions: Make
sure the height of surface E is 2-4mm
lower than surface G.
1312740-T01-A
Snap
SCALE
5:1
Fig.#17a
17a
Screw
Fig.#17b
17b
Fig.#17c
17c
SCALE
5:1
Fig.#17d
17d
E
Float
Water Cup
Fig.#17e
17e
-8-
OPEN
CLOSE
Screw
E
G 2-4mm
G
Advertisement
