Advertisement
Carefully align and lower the bowl.
Apply weight to the bowl rim to let the
outlet insert into plastic trap.
Carefully thread the screws into the
brackets, until toilet is secure.
Alternately tighten left and right sides
to prevent pulling the toilet off center.
Install cap to cover screw.
Do not overtighten.
Apply caulk around base.
TO CONNECT WATER
SUPPLY
* Flexible hose (not provided) are
recommended to connect the supply
line to the fill valve. If you use a rigid
connection(not provided), take care
not to apply side forces to the bottom
of the fill valve. Be sure the rigid
connection must be fit with supply line
completely to prevent damage shank
by forced connection.
1312740-T01-A
Outlet
Plastic Trap
Fig.#10
10
Bushing
Screw
Cap
Fig.#11
11
Fig.#12
12
Supply Shank*
Fig.#13
13
-6-
Supply Shut-Off Valve
(
(
)
)
Advertisement
