Swann D02C5 Operating Instructions Manual page 25

PTZ (continued)
Onscreen PTZ Controls
You can bring up the PTZ Setup window by pressing the PTZ button on the remote control, or by right-clicking the mouse in
the live view mode, and choosing PTZ.
Note: the features which will usable depend on the capabilities and limitations of your PTZ system.
Here, you'll be able to aim the camera, as well as alter aspects of the lens and iris configuration. We'll explain a little more
about what each of these does:
1
2
6
1. SPEED ADJUSTMENT
By selecting this with the mouse or the arrow buttons,
you are able to change the speed at which your camera
will tilt, pan and zoom. The higher the number, the faster
the camera will move.
2. ARROW BUTTONS
Used to manually move the camera. The arrow buttons
will move the camera in the selected direction, and the
centre button toggles Auto-Scan ON and OFF.
3. ZOOM
If you are using a variable zoom PTZ camera, you can
zoom in or out here. Zooming in will increase the size
of objects in view, at the expense of reducing the field
of view. You may need to adjust focus when using the
ZOOM function.
4. FOCUS
Adjusts the focal plane of the lens. If an image is blurry,
try adjusting the focus. To best set the focus, move one
direction until things become clear, and then blurry
again. Move back and forth until you find sharp focus.
5. IRIS
Controls how much light gets into the camera. If things
look too bright (or white) lower the IRIS value. If things
are too dark (or black) raise the IRIS value. Many cam-
eras do this automatically.
6. CRUISE SET
Open the CRUISE SETUP window, see below.
7.EXIT
Leaves the PTZ SETUP menu.
Onscreen PTZ Controls
To setup CRUISE MODE, you'll need to define "POINTS" for each
channel with a PTZ camera you want to "cruise". A POINT is one
place that the camera needs to move to on its loop. To set a point:
• Move the camera to the desired position using the arrows.
• Hit the SET button.
• The point will be saved. Its name will be one digit higher than
the previous point.
• For easy cruise setup, define your points in the order you want
the camera to
The GOTO button will take the camera back to a predefined point. The
CLEAN button will remove all your defined points.
When you've set your points, select SAVE, then EXIT.
3
4
5
7
25