Table of Contents
Advertisement
3.0 Hardware Connection
RJ45 Port Connection
Connect the RJ45 port of the switch and the corresponding network device via
cables, the PoE power supply function of the switch is default enabled on the
downlink port of the switch, which can be used for IEEE802.3af or IEEE802.3at
standards powered devices such as APs, bridges, and network cameras.
Note:
•
•
•
9
When the switch is connected to workstations, servers, routers or other
Ethernet devices, the cable length should be within 100 meters.
The Auto-MDI / MDIX Ethernet interface is enabled by default. Category
5,the standard network cable or crossover cable can be used for Ethernet
connection.
Do not connect the RJ45 port to the phone line.
Advertisement
Table of Contents
