Table of Contents
Advertisement
User Manual
16 Port Gigabit Layer 2 Managed PoE Switch
RJ45 Port
Supports 16 10/100/1000 Mbps ports, both supporting
IEEE802.3af and IEEE802.3at standard PoE power supply.
SFP Port
Provides 2 Gigabit SFP optical module expansion slots (17, 18) for plugging Gigabit
SFP modules
RST Button
When the switch is powered on, press the button with needle and release the
device to enter the restart state. When the SYS light is turned on again, the device
restarts. When the switch is powered on, press the button for 5 seconds or more
to release the button device to enter the reset status, when SYS lights up again,
the device resets successfully.
Console Port
The Console port is used for connecting to the serial port of a computer or other
terminal to manage or configure the switch.
Back Panel Switch Appearance
Includes power socket and ground terminal as shown below.
Power Socket
The power supply to the switch should be 100-240V~50/60Hz AC power.
Ground Terminal
Please use a wire to ground so that preventing lightning strikes. To avoid product
lightning strikes and extend the life of the product
5
Advertisement
Table of Contents
