Front Panel Switch Appearance - Genie IP16GESP2 User Manual

User Manual 16 Port Gigabit Layer 2 Managed PoE Switch

Front Panel Switch Appearance

Including indicators, RJ45 port, shortcut buttons, RST button, SFP
port, CONSOLE port, as shown below.
Indicator Table
Indicator
PWR
PoE
LINK / ACT
SYS
DIP Switch Function
AI QoS:
Improve video data processing capabilities and improve the monitoring of Caton
and Mosaic phenomena in the network.
AI Extend:
1-8 port rate down to 10Mbps, but the transmission distance up to
250m.
AI VLAN:
Isolating ports 1-16 from each other, suppress network storms
effectively and improve network performance.
AI Power Supply:
Detect PD, power failure and restart dead equipment.
4
Title Colour Work
State
Power Red Solid
indicator
Off
PoE power Yellow Solid
indicator
Off
Connection Green Blinking
indicator
Off
System Green Blinking
Off
Description
Power is normal
No power, the power switch is not turned on, power supply
is abnormal.
The corresponding RJ45 port is connected to the powered
device and the power supply is normal.
The corresponding RJ45 port is not connected to the
powered device or the power supply is abnormal.
A valid link is established.
An invalid link is established.
System is functioning properly.
System is functioning improperly, Software is damaged.