Table of Contents
Advertisement
3.1.
RECEIVING THE TIME
When your Suunto n6
receives a broadcast signal, it should automatically receive
HR
the correct time from an atomic clock. This happens even if you have not yet
activated the MSN Direct service. As long as your Suunto n6
keeps on receiving
HR
the signal, you do not need to set the time. The time is accurate to a few thousands of
a second, and it automatically adjusts for daylight saving time and leap years. In
addition, your Suunto n6
automatically switches to different time zones as you
HR
travel from place to place.
NOTE: When you turn on your Suunto n6
, it may take a few minutes to receive the
HR
time from an atomic clock.
If you are in an area where your Suunto n6
cannot receive a signal, you can set the
HR
time manually. You can also change the time display from a 12-hour clock to a 24-
hour clock, and you can override the automatic time zone setting. For more details,
see Chapter 6. Settings.
19
Advertisement
Table of Contents
