Table of Contents
Advertisement
Suunto Traverse Alpha
To add Suunto Apps to your Suunto Traverse Alpha:
1. Go to the App zone section in Movescount community to browse existing Suunto Apps. To
create your own App, select App Designer.
2. Add Suunto App to a sport mode. Connect your Suunto Traverse Alpha to your
Movescount account to synchronize Suunto App to the watch. The added Suunto App will
show the result of its calculation while you exercise.
NOTE: You can add up to five Suunto Apps to each sport mode.
3.28. Time
The time display on your Suunto Traverse Alpha shows the following information:
top row: date
•
middle row: time
•
bottom row: change with [VIEW] to show additional information such as sunrise/sunset,
•
altitude and battery level.
In the options menu under GENERAL » Time/date, you can set the following:
Dual time
•
Alarm
•
Time and date
•
3.28.1. Alarm clock
You can use your Suunto Traverse Alpha as an alarm clock. Turn the alarm on/off and set the
alarm time in the options menu under GENERAL » Time/date » Alarm.
When the alarm is switched on, the alarm symbol is shown on most of the displays.
When the alarm sounds, you can:
Snooze by pressing [LIGHT] . The alarm stops and restarts every five minutes until you
•
stop it. You can snooze up to 12 times for a total of one hour.
Stop by pressing [START] . The alarm stops and restarts the same time the following day,
•
unless you switch the alarm off in the options menu.
Stop
7:00
Snooze
NOTE: When snoozing, the alarm icon blinks in the time display.
3.28.2. Time syncing
Your Suunto Traverse Alpha time can be updated through your mobile phone, computer
(Suuntolink) or GPS time.
When you connect your watch to the computer with the USB cable, Suuntolink by default
updates your watch time and date according to the computer clock.
34
24h
5min
Advertisement
Table of Contents
