Receiving The Time - Suunto N3i Instruction Manual

Suunto n3i watches: user guide

Hide thumbs Also See for N3i:

Table of Contents

3.1.

RECEIVING THE TIME

When your Suunto n3i receives a broadcast signal, it should automatically receive the

correct time from an atomic clock. This happens even if you have not yet activated

the MSN Direct service. As long as your Suunto n3i is receiving a signal, you do not

need to set the time. The time is accurate to a few thousands of a second and

automatically adjusts for daylight savings time and leap years. In addition, your

Suunto n3i automatically changes to different time zones as you travel from place to

place.

Note: When you turn on your Suunto n3i, it may take a few minutes to receive the

time from an atomic clock.

If you are in an area where your Suunto n3i cannot receive a signal, you can set the

time manually. You can also change the time display from a 12-hour clock to a 24-

hour clock, and you can override the automatic time zone setting. For details, see

Chapter 6. Settings.

Table of Contents