Table of Contents
Advertisement
7.4.
INSTALLATION
To use your Suunto n6
Suunto USB drivers, .Net Framework, and the Suunto n6
software. The Suunto n6
7.4.1. Installing the Suunto n6
1. Make sure your Suunto n6
2. Insert the Suunto n6
opens automatically.
3. Select Install Suunto n6
4. Wait for the installation to begin and follow the installation instructions.
The software components will be installed in the following order:
• Net Framework v 1.1. This will be installed only if it has not been installed in
your system before.
• Suunto n6
HR
select the synchronization method of the training calendar included in the Suunto
n6
Training Manager. There are two methods available: Synchronizing with
HR
Microsoft Outlook or with your Suunto n6
Section 8.3.2. Calendar synchronization.
• Suunto n6
HR
necessary.
5. After the installation wizard has finished the process, attach your Suunto n6
the USB port. The system should recognize the device automatically.
NOTE: If the installation does not automatically start, click Start --> Run and type
D:\cd_menu.exe. (Substitute D for the CD-ROM drive).
46
Training Manager, you need to install the appropriate
HR
installation wizard will do this for you.
HR
software
HR
is not connected to your computer.
HR
CD-ROM into the drive. The installation prompt window
HR
Training Manager.
HR
Training Manager software. During this installation, you need to
USB drivers. The installation program will install the drivers if
Training Manager PC
HR
. For more information on this, see
HR
to
HR
Advertisement
Table of Contents
