Suunto T6 Brief Introduction page 4

PRACTICAL TIPS
USING SUUNTO t6 DURING
TRAINING
1. Put on your HR transmitter belt and ensure
it fits snugly against your chest.
2. Ensure the electrodes of the transmitter
belt are lightly wet.
3. Switch on the heart rate reception of your
Suunto t6.
4. If you want to use timers or HR limits,
activate them in the Training mode.
5. Start recording your training by pressing
START/STOP in the Training mode. When
the stopwatch is on, you can take lap times
with UP/LAP and switch between modes
with DOWN/LIGHT.
6. Stop the training by pressing START/STOP.
7. Connect the Suunto t6 to PC with the
Datasnake.
8. Download and analyze the recorded data in
the Suunto Training Manager PC software.
KEEP THE NUMBERED SETS
TOGETHER
The Suunto t6 wrist units and heart rate
transmitter belts are individually paired to
each other to eliminate cross talk. The wrist
unit only receives heart rate from the belt
it is paired with.
The paired sets are indicated with numbers
1-10. Make sure that you always distribute
matching parts. If needed, the wrist units
and belts can be paired again following the
instructions in the Quick Guide.
EXTEND THE FUNCTIONALITY OF THE SUUNTO t6 WITH WIRELESS ACCESSORIES.
Suunto Foot POD
is the lightest, most practical and
most reliable speed and distance
sensor available for RUNNING.
Feather light and firmly clipping to
shoe without untying laces, it is
virtually unnoticeable when running.
3.
5.-6.
Suunto Bike POD
turns your Suunto t6 into a
wireless BIKE COMPUTER.
It is easy and secure to attach
to the front hub.
www.suunto.com
1.
Suunto PC POD
enables real time training
analysis with the future
versions of the Suunto Training
Manager.