Beko BSVOG 090 User Manual page 19

2 Unit specifications and features
Note on louver angles:
When using COOL or DRY mode,
do not set louver at too vertical
an angle for long periods of time.
This can cause water to condense
C
on the louver blade, which will
drop on your floor or furnishings.
When using COOL or HEAT
mode, setting the louver at too
vertical an angle can reduce the
performance of the unit due to
restricted air flow.
2.5.2 Setting horizontal angle
of air flow
The horizontal angle of the airflow must be set
manually. Grip the deflector rod (See Fig.B) and
manually adjust it to your preferred direction.
For some units, the horizontal angle of the
airflow can be set by remote control. please refer
to the Remote Control Manual.
Warning:
Do not put your fingers in or
A
near the blower and suction
side of the unit. The high-
speed fan inside the unit
may cause injury.
Split type air conditioner / User Manual
Deflector
rod
Fig. B
19 / EN