ION Air LP iT55F Quick Start Manual page 5

Pairing Air LP to a Bluetooth Speaker
Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Air LP turntable.
3. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth device. Once
Air LP is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth
speaker should also indicate that its paired.
Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive and
the LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Air LP turntable. If you are connected to a Bluetooth speaker with a play/pause
button, and do not hear audio, try pressing the play/pause button.
5. Adjust the volume on your Bluetooth speaker (if applicable) or the Volume knob on Air LP to
control the output level.
6. To disconnect pairing, power off the Air LP turntable or turn of Bluetooth pairing on your Bluetooth
speaker.
Note: Move other Bluetooth receivers/speakers out of range of Air LP (30'/9.1m or more) or turn them
off to connect to your Bluetooth speaker.
Using Air LP With Your Computer
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape Converter and a USB cable. EZ
Vinyl/Tape Converter conveniently saves your recordings to your computer. After you finish
converting your vinyl, you can then burn to CD or load onto portable media devices.
Follow the instructions on the included software download card for installing EZ Vinyl/Tape
Converter.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect
Air LP's USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All
Programs (Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music,
move Air LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or connect
Air LP's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-
level inputs; Air LP's RCA outputs are line-level and could damage a device with phono-level
inputs.
4. When you have finished recording, raise Air LP's tonearm from the record and return it to its arm
clip.
Playback
You can listen to the music on your computer through its internal speakers or through headphones
connected to it. (Air LP cannot be used as a playback device for your computer's audio.)
To listen to a record while it's playing, listen through your computer's speakers, or connect Air LP's
RCA outputs to a stereo system or powered speakers. Do not connect them to phono-level inputs;
Air LP's RCA outputs are line-level and could damage a device with phono-level inputs.
5