Bosch BBS266 Original Operating Instructions page 14

English – 12
Inserting and Removing the eBike Battery
When inserting the battery into the holder or re-
u
moving it from the holder, always switch off the
eBike battery and the eBike beforehand.
Once you have inserted the eBike battery, check
u
that it is correctly positioned and secure in all
directions.
Inserting and Removing the Standard Battery
(6)
(5)
(8)
(9)
In order for the battery to be inserted, the key (5)
must be inserted into the lock (6) and the lock must
be open.
To insert the standard battery (8), place it onto the
contacts on the lower holder (9) on the eBike (the
battery can be tilted towards the frame by up to 7°).
Twist it into the upper holder (7) as far as possible
until you hear it click into place.
Always check that the battery pack is locked in
u
place. To do this, pull on the battery pack (after the
key has been removed).
Always secure the eBike battery by closing the lock
(6) – otherwise the lock may open and the eBike bat-
tery may fall out of the holder.
Always remove the key (5) from the lock (6) after
closing it. This prevents both the key from falling out
and the eBike battery from being removed by unau-
thorized third parties when the eBike is not in use.
0 275 U07 XPX | (16.03.2023)
(7)
(10)
To remove the standard battery (8), switch it off
and open the lock using the key (5). Tilt the eBike
battery out of the upper holder (7) and pull it out of
the lower holder (9).
Inserting and removing the rack-mounted battery
(6)
(5)
7°
In order for the battery to be inserted, the key (5)
must be inserted into the lock (6) and the lock must
be open.
To insert the rack-mounted battery (2), slide it con-
tacts-first into the holder (1) on the rack until you
hear it click into place.
Always check that the battery pack is locked in
u
place. To do this, pull on the battery pack (after the
key has been removed).
Always secure the battery by closing the lock (6) –
otherwise the lock may open and the battery may fall
out of the holder.
Always remove the key (5) from the lock (6) after
closing it. This prevents both the key from falling out
and the eBike battery from being removed by unau-
thorized third parties when the eBike is not in use.
To remove the rack-mounted battery (2), switch it
off and open the lock using the key (5). Pull the bat-
tery out of the holder (1).
(1)
(10)
(2)
Bosch eBike Systems