Starting And Stopping; Before Starting; Starting; Stopping - Husqvarna TS60 US Operator's Manual

Before starting

WARNING! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using the
machine.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
Make sure no unauthorised persons are in
the working area, otherwise there is a risk of
serious personal injury.
Prevent unintentional starting of the motor.
Ensure the power switch is in the OFF-
position before connecting the machine to a
power source.
• Check that the machine is assembled correctly and do not
show any signs of damage. See instructions in the section
"Assembling and adjustments".
• Perform daily maintenance. See instructions in the section
"Maintenance".

Starting

USA:
• Flip the power switch up to start the machine. The water
pump starts automatically when the machine is started.
• Wait a few seconds for the water slots in the cart to be
filled with water before starting to cut.
Canada:
• Push the insert down to release the lock and flip the power
switch up to start the machine. The water pump starts
automatically when the machine is started.
• Wait a few seconds for the water slots in the cart to be
filled with water before starting to cut.

STARTING AND STOPPING

Stopping

• Flip the power switch down to stop the machine. Make
sure that the cutting blade can rotate freely until it is
completely stopped.
– 15
English