Table of Contents
Advertisement
X7DWT-INF User's Manual
Hardware Monitor Logic
CPU Temperature Threshold
This feature displays a predefi ned CPU overheating temperature threshold that will
activate the alarm when the CPU temperature reaches this overheating threshold.
The options are 70
o
C, 75
o
C, 80
o
C and 85
o
C.
Highlight this and hit <Enter> to see monitor data for the following items:
CPU1 Temperature/CPU1 Second Core
CPU2 Temperature/CPU2 Second Core
System Temperature
Fan1-Fan8 Speeds: If the feature of Auto Fan Control is enabled, the BIOS will
automatically display the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice
versa. Select Workstation if your system is used as a Workstation. Select Server
if your system is used as a Server. Select 3-pin if your chassis uses 3-pin fans.
Select 4-pin if your chassis uses 4-pin fans. Select "Disable" to disable the fan
speed control function and allow the onboard fans to constantly run at the full speed
(12V). The Options are: 1. Disable, 2. Optimized Server w/3-pin, 3. Optimized
Workstation w/3-pin, 4. Optimized Server w/4-pin, 5. Optimized Workstation w/4-
pin, 6. 4-pin Quite Mode, and 7. 4-pin Super Quite Mode.
Voltage Monitoring
The following items will be monitored and displayed:
VcoreA/VcoreB
+12V/-12V
+5Vsb/+5VDD
+3.3V
P1V5/P_VTT/Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take pre-
cedence over the BIOS settings. When fi rst installed, Supero Doctor III adopts
the temperature threshold settings previously set in the BIOS. Any subsequent
changes to these thresholds must be made within Supero Doctor, since the SD
III settings override the BIOS settings. For the Windows OS to adopt the BIOS
temperature threshold settings, please change the SDIII settings to be the same
as those set in the BIOS.
4-18
Advertisement
Table of Contents
