Supermicro X7DWT User Manual page 104

Supermicro x7dwt motherboards: user guide

Table of Contents

X7DWT/X7DWT-INF User's Manual

Creating Arrays

Before you create arrays, make sure that the disks for the array are connected

and installed in your system. Note that disks with no usable space, or disks that

are un-initialized or not formatted are shown in gray and cannot be used. (Note:

It is recommended that you conﬁ gure devices before you create arrays.)

To create an array:

1. From the main menu (shown on page D-4), select Create Array.

2. Select the disks for the new array and press Insert (as the screen shown below).

(Note: To de-select any disk, highlight the disk and press Delete.)

3. The arrays you have selected will appear on the Selected Drives dialog box on

the right (as shown below.)

4. Press Enter when both disks for the new array are selected. The Array Proper-

ties menu displays.

D-8

Table of Contents

X7dwt-inf