Switching Off Demo Mode; Resetting The Settings To Their Default Settings; Information - Miele FNS 7794 E Operating Instructions Manual

Switching off Demo mode 
Demo mode  allows the refrigeration
appliance to be presented in the show-
room without the cooling system being
switched on. Do not activate this setting
for domestic use.
If Demo mode has been switched on
as a default setting,  will show on the
status display.
 Tap .
 Tap .
 Swipe left or right until  is shown in
the middle.
 Tap .
After Demo mode  has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their default
settings 
All settings made on the refrigeration
appliance will be reset to default set-
tings (for settings; see "Guide to the ap-
pliance").
 Tap .
 Swipe left or right until  is shown in
the middle.
 Tap .
 will appear on the display.
 Touch OK.
The refrigeration appliance shuts down
and must be switched on again.
Selecting additional settings
Information 
Appliance data (model identifier and
serial number) is shown on the display.
Keep this appliance data to hand; you
will need it:
- When integrating the refrigeration ap-
pliance into your WiFi network (see
"Selecting additional settings –
Miele@home").
- When reporting an appliance fault to
Miele Customer Service (see "Ser-
vice").
- When retrieving information from the
EPREL database (see "Service").
49