Bosch Professional GLL 50 G Original Instructions Manual page 10

10 | English
Line Laser
Capacity
Recommended ambient temperature during charging
Power supply
Output voltage
Minimum output current
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sun-
light).
B) At 20–25 °C
C) Valid when levelled (0°)
D) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration,
no fog, no smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations
in accuracy.
E) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
F) Protection against foreign bodies > 1 mm and against water jets (nozzle) from any angle
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Measuring Tool Power Supply
The measuring tool can be operated either with a Bosch lithium-ion battery pack (6) or
with conventional non-rechargeable batteries.
Note: Never store the measuring tool without an inserted battery compartment cover (9)
or lithium-ion battery pack (6), particularly in dusty or humid environments.
Operation with Non-Rechargeable Batteries
To switch from a lithium-ion battery pack (6) to non-rechargeable batteries, remove the
lithium-ion battery pack (6).
It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
Insert the non-rechargeable batteries.
When inserting the batteries, ensure that the polarity is correct according to the illustra-
tion on the inside of the battery compartment.
Insert the battery compartment cover (9) and let it click into place.
If the non-rechargeable batteries are running low, the laser lines will flash slowly for ap-
prox. 1 min.
1 609 92A 8K4 | (01.06.2023)
GLL 50 G
1.0 Ah
+10 °C to +35 °C
5.0 V
500 mA
Bosch Power Tools