Driver Fatigue Alert; Ldws - HP u818x Kit Quick Start Manual

3.6.3 Driver Fatigue Alert

If the Driver Fatigue Alert function is enabled, this product produces audible
alert and screen message one hour after it has begun recording and repeats the
alerts every half hour afterwards.
To enable the Driver Fatigue Alert, do the following:
1. Press the
2. Press the
OK
the
3. Press the
button to enable the function.
4. Press the
5. This product produces audible alert and screen message when Driver
Fatigue Alert activates.

3.6.4 LDWS

Once your car's location is determined by GPS and the LDWS function is enabled,
this camcorder produces audible alert and screen message when you drive off of
or change lanes at speeds over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems), do the following:
1. Press the
2. Press the
button for entering function menu.
3. Press the
button to enable the function.
4. Press the
button to enter the OSD menu.
/ button to select Driver Fatigue Alert, and then press
button for entering function menu.
/ button to select On, and then press the
button return to recording screen.
button to enter the OSD menu.
/ button to select LDWS, and then press the
/ button to select On, and then press the
button to return to recording screen.
26
OK
OK
OK