HP u818x Kit Quick Start Manual page 47

Menu option Description
Date / Time Set the date and time.
Language Language setting.
Resolution Setting of video resolution.
EV Setting of exposure value.
Set LCD off time or HUD.
Set HUD:
After power on 7 seconds, the screen will be
always in HUD mode. Press
exit HUD mode and return to preview scree.
(Recording is not affected when screen is in
LCD Setting
HUD mode).
Set off after 7sec or 1min:
Screen will be off after a set time if no
operation is detected during the standby or
record mode. Press any button will switch it on.
(Recording is not affected when screen is off).
Voice Record Setting for activating audio in the video.
Key Tone Enable / disable power-on sound and key tone.
Volume Adjust the sound volume.
Save respective video files in a length of the
Record Interval
selected duration.
If one of parking mode is activated, the
Parking Mode camcorder will enter parking mode 10 seconds
after disconnect the external power.
If Collision Detection is activated, this
Collision
camcorder starts emergency recording once it
Detection
detects any collision.
When Driver Fatigue Alert is enabled, audible
Driver Fatigue alert and screen message will be activated 1
Alert hour after the camcorder is powered on, with a
repetition every 30 minutes.
button can
45
Available option
Press the / button to
adjust the value, and then
press the button to set
OK
the next field, and complete
setting
According to the actual
shipping regions.
2560x1440 30fps HDR
1920x1080 60fps HDR
1920x1080 30fps HDR
Press the / button to
set the exposure value. It can
be set between -2 ~ +2
On/ Turn off after 7 sec / Turn
off after 1min/ HUD
On / Off
On / Off
Press the / button to
set the volume. It can be set
between 0 ~ 10.
30 sec. / 1 min. / 3 min.
Off/ Park Recording / Motion
and Collision Detection /
Timelapse
High Sensitivity / Normal
Sensitivity / Low Sensitivity /
Off
On / Off