Advertisement
Quick Links
Product Name: Dotless Sideview IP66 Rated LED Tape 12V 10W 144 LEDs Per Metre
Product Code: K30-1260
Kit Contents
LED flexible dotless strip light
3M Surface Prep Wipe
1 X Spare end cap
1 X Corner connector
1 X Small tube of silicone
Important Safety Information
This product is powered by an LED driver (supplied separately). The LED driver must be installed by
a qualified electrician.
Installation
1
Ensure the
surface is clean
and dust free
by using the 3M
surface prep
wipe. Allow 2
minutes for the
surface to dry.
2
If you need to
reduce the
length of the
strip, partially
peel back the
red tape on the
reverse of the
strip.
3
Cut the strip at
the indicated
cut points using
a pair of sharp
scissors.
Advertisement
Related Manuals for TLW vew K30-1260
Summary of Contents for TLW vew K30-1260
- Page 1 Product Name: Dotless Sideview IP66 Rated LED Tape 12V 10W 144 LEDs Per Metre Product Code: K30-1260 Kit Contents LED flexible dotless strip light 3M Surface Prep Wipe 1 X Spare end cap 1 X Corner connector ...
- Page 2 Product Name: Dotless Sideview IP66 Rated LED Tape 12V 10W 144 LEDs Per Metre Product Code: K30-1260 Installation Peel back the Plug the Using the remaining red power lead supplied tape and into the silicone, place a install the LED connector small amount strip as...
Need help?
Do you have a question about the vew K30-1260 and is the answer not in the manual?
Questions and answers