Wire's Connection - Baudcom BD-3224V User Manual

All the machine frames should be connected with protective copper strip. The grounding wire
should be as short as possible and avoid circling. The area of the conduction between grounding
wire and grounding strip should be no less than 25mm
2.2.5 Device Grounding
Connecting the device's grounding rod to frame's grounding pole with copper wire.

2.3 Wire's Connection

The grounding wire conductive screw is located at the right end of rear panel, and the power
switch, fuse, power supply socket is just beside ,whose order goes like this, power switch is on
the left ,power supply socket is on the right and the fuse is just between them.
 Connecting Power Cord
User can insert one end into power supply socket, while insert the other end to AC power.
 Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way, say,
share the same ground with other devices. When the device adopts united way, the
grounding resistance should be smaller than 1Ω.
Caution:
Before connecting power cord to BD-3224V HEVC/H.265 HD Encoder, user should
set the power switch to "OFF".
Http://www.baudcom.com.cn
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Tel:0086 21 37709251
2
.
Email: info@baudcom.com.cn