Table of Contents
Advertisement
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Chapter 2 Installation Guide
2.1 Acquisition Check
When users open the package of the device, it is necessary to check items according to packing
list. Normally it should include the following items:
BD-3224V HEVC/H.265 HD Encoder
Power Cord
HDMI cable
Network cable
If any item is missing or mismatching with the list above, please contact local dealer.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter including:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing Encoder
Connecting signal cables
Connecting communication port (if it is necessary)
2.2.1 Device's Installation Flow Chart is Illustrated as following：
Connecting
Grouding
Acquisition
Fixing
Connecting
Setting
Running
Wire and
Check
Device
Signal Wire
Parameter
Device
Power
Cord
2.2.2 Environment Requirement
Item
Requirement
Tel:0086 21 37709251
Email: info@baudcom.com.cn
Http://www.baudcom.com.cn
Advertisement
Table of Contents
