Chapter 4 Troubleshooting
BAUDCOM's ISO9001 quality assurance system has been approved by CQC organization. For
guarantee the products' quality, reliability and stability. All BAUDCOM products have been
passed the testing and inspection before ship out factory. The testing and inspection scheme
already covers all the Optical, Electronic and Mechanical criteria which have been published by
BAUDCOM. To prevent potential hazard, please strictly follow the operation conditions.
Prevention Measure
Installing the device at the place in which environment temperature between 0 to 45 °C
Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary
Checking the input AC within the power supply working range and the connection is correct
before switching on device
Checking the RF output level varies within tolerant range if it is necessary
Checking all signal cables have been properly connected
Frequently switching on/off device is prohibited; the interval between every switching on/off
must greater than 10 seconds.
Conditions need to unplug power cord
Power cord or socket damaged.
Any liquid flowed into device.
Any stuff causes circuit short
Device in damp environment
Device was suffered from physical damage
Longtime idle.
After switching on and restoring to factory setting, device still cannot work properly.
Maintenance needed
Http://www.baudcom.com.cn
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
Tel:0086 21 37709251
Email: info@baudcom.com.cn