Parking The Trailer; Uncoupling Towing Vehicle From Trailer - Landoll 345E Operator's Manual

Parking the Trailer

1. Position truck/trailer rig on a level, solid surface.
2. Set the PARKING BRAKE, not the trailer hand brake,
and check for proper brake holding.
3. Chock wheels of trailer.
4. Check for any air leaks in lines, relay valve, brake air
chamber, or any other air system component.
OPERATING INSTRUCTIONS
Uncoupling Towing Vehicle from
Trailer
1. Park the trailer according to instructions in "Parking
the Trailer" on page 3-5.
2. Disconnect emergency and service air lines.
3. Disconnect the electrical cable and store so end is
not on the ground.
4. Disconnect safety chains from the towing vehicle.
5. Lower the landing gear to the ground. Tilt trailer bed
up so next landing gear pin hole is available. Install
and lock landing gear pins. Unlock pintle hitch. Tilt
trailer bed down until pintle hitch eye lifts off pintle
hook.
6. Shut off towing vehicle hydraulic supply, disconnect
hydraulic hoses.
7. Verify that all service lines and safety chains are
disconnected and trailer wheels are chocked.
8. Pull towing vehicle away from the trailer.
3-5