C
WD80J6A10AW_DC68-03628L_EN.indd 21
C
E
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While holding down part (E), connect the
water supply hose to the adaptor. Then,
release part (E). The hose fits into the
adaptor with a clicking sound.
English 21
2017/12/5 17:17:08